Thanks for registering your SS127!

Now that you have registered your kayak, let us help you create the best experience on the water

Accessories

Bending Branches - Angler Ace II Carbon Kayak Fishing Paddle

The best overall value in kayak fishing paddles, the Ace combines the weight savings of a carbon shaft with the most durable blades available. 

  • Oversized carbon-reinforced nylon blades provide more power and efficiency for loaded down fishing kayaks
  • 100% carbon shaft is light and durable 
  • Built-in hook retrieval system 
  • Tape measure on shaft is a sizing guide, allowing you to verify catches on the spot 

Shaft Material: 100% Carbon
Blade Material: abX Carbon Reinforced Nylon
Blade Size: 7.25 x 18 in. (18 x 46 cm.) 
Blade Surface Area: 105 sq. in. (677 sq. cm.) 
Weight: 30 oz. (850 g)
Ferrule Angles: 0° & 60° (L or R)

*Tape measure is not an official measuring tool for competitive angling or to determine the legality of a catch. Tape measure print may vary in accuracy due to the manufacturing process. 

Bending Branches paddles are guaranteed against manufacturing defects for one year from date of purchase.

$224.95

Bonafide Kayak Covers

Bonafide Kayak Covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set - 5 or 6) that can be used to secure the cover when traveling through the sewn in loops on the cover. All covers are made in USA and created with marine-grade anti-wick thread that includes double-stitched construction and 4-ply join seams.
$174.99

Bonafide SS127 Bow Mount

Right out of the box, the Bonafide Bow plate gives you a nice level surface to mount a plethora of aftermarket accessories. The plate is thick enough (3/4") to use self tapping screws and sits high enough off the deck to use internal hardware. There are 3 accessory patterns that come pre-drilled (Micro Power Pole, Motorguide quick release bracket, and the Motorguide 6 bolt pattern). All stainless steel hardware is included to mount the plate to the kayak. As an added bonus, the plate does not inhibit the function of the boss strap and also acts as its own paddle park.

*Note: The install requires two holes to be drilled into the kayak and does not void the Hull Warranty.

INSTALLATION VIDEO

$129.00

Flex Wings, SS Kit

Introducing the new FlexWings™ from Bonafide Kayaks. With being the only kayak brand on the market with dual skid plates it presented itself with a unique opportunity to do something different than a skeg or rudder and the FlexWings were the result of months of research and development to further enhance the tracking and performance of your Bonafide SS107 and SS127. The FlexWings install underneath the stock Dual Skid Plates using the stock hardware.   With the FlexWings facing towards the inside they effectively manage the turbulent water flowing off the stern and result in tracking and performance unlike anything we have ever experienced. Made in the USA from flexible yet stiff rubber the FlexWings can be dragged and paddled over rocks and timber without any concern of your kayak being damaged. Sold as a pair.  Hardware not included.
$29.99

Garmin ECHOMAP UHD 93sv, US w/GT56 Transducer


Take fishing to the next level.

SONAR SUPPORT

This chartplotter supports a variety of Garmin transducers (sold separately), including the Panoptix LiveScope™ scanning sonar system, which lets you see all around your boat in real time.

VIVID COLOR PALETTES

High-contrast vivid scanning sonar color palettes make it easier than ever to distinguish targets and structure.

OPTIONAL TRANSDUCER BUNDLE

Select the transducer bundle to add a GT56 transducer for Garmin CHIRP traditional sonar and Ultra High-Definition ClearVü and SideVü scanning sonars. With three scanning sonar frequencies and 20% greater range for our UHD SideVü sonar, you’ll get top performance at all depths.

PRELOADED MAPPING

Experience unparalleled coverage and detail with preloaded LakeVü g3 inland maps featuring integrated Navionics® data. Maps cover more than 18,000 lakes with up to 1’ contours.

QUICKDRAW CONTOURS

Create personalized fishing maps on-screen with 1’ contours. Keep the data to yourself, or share it with the Quickdraw Community on the Garmin Connect™ app3.


 


Boat connected.

NETWORK CAPABLE

If you have multiple compatible ECHOMAP UHD or ECHOMAP Ultra devices on your boat, the 7” and 9” models can share information — such as sonar, user data and charts — with them.

NMEA 2000® AND NMEA 0183 NETWORKS

Connect to your compatible autopilots, digital switching, weather, Fusion-Link audio system, media, VHF, AIS, engine data, heading sensors — such as the SteadyCast sensor — and more from one screen.

ACTIVECAPTAIN® APP

Built-in Wi-Fi® connectivity pairs with the free all-in-one mobile app for access to the OneChart™ feature, smart notifications, software updates, Garmin Quickdraw™ Community data and more1.

FORCE® TROLLING MOTOR COMPATIBILITY

Take control of the most powerful and efficient trolling motor available2, route it to waypoints, follow tracks and more from the screen of your chartplotter.

ENGINE CONNECTIVITY

Connect this chartplotter to different kinds of engines — including select Mercury and Yamaha® models — to see RPMs, fuel flow, temperature, trim and other important information at a glance. You may need additional hardware, so be sure to check with your engine manufacturer.


 SPECIFICATIONS

Physical & Performance

Display size 7.8" x 4.8"; 9" diagonal (19.9 x 11.3 cm; 22.9 cm diagonal)
Display resolution 400 x 800 pixels
Physical dimensions 11.4" x 6.5" x 2.4" (28.2 x 16.4 x 6.0 cm)
Receiver

5 Hz

Water rating

IPX7

Weight

2.3 lbs (1.0 kg)

Mounting options Bail or flush
Display type WVGA display
Antenna Internal or external over NMEA 2000

Maps & Navigation

Preloaded maps

LakeVü g3 (inland maps)

Accepts data cards

1 microSD™ card; 32 GB maximum size

Routes 100
Track log 50,000 points; 50 saved tracks

Features

ClearVü

Yes with CHIRP (built-in)

Waypoints

5,000

Transmit power 500 W (RMS) / 4,000 W (peak to peak)
NMEA 0183 compatible Yes
Dual-beam (77/200 kHz) sonar capable Yes
Supports DSC (displays position data from DSC-capable VHF radio) Yes
Additional
NMEA 2000® compatible Yes
ActiveCaptain compatible

Yes

Sonar recording Yes
Garmin Marine Network™ ports

1 Panoptix™ port

Garmin Sonar compatible Yes
GSD™ Black Box sonar support No
Sonar history rewind Yes
Garmin SmartMode compatible (customizable monitor presets) No
Maximum depth

2,300 ft @ 77 kHz, freshwater

1,100 ft @ 77 kHz, saltwater

(depth capacity is dependent on water bottom type and other water conditions)

Dual-frequency (50/200 kHz) sonar capable Yes
SiriusXM™ Weather & Radio compatible No
Wireless connectivity

Yes

Water temperature log and graph Yes
GCV™ Black Box sonar support Yes
Wireless mouse compatible No
NMEA 0183 input ports

1

J1939 Compatible No
Supports AIS (tracks target ships position) Yes
Polarized support No
Garmin Meteor™ Audio System compatible No
Wireless remote compatible No
Supports FUSION-Link™ compatible radios No
Transducer pin numbers 12
Bottom lock (shows return from the bottom up) Yes
NMEA 0183 output ports

1

Tide tables Yes
Power consumption

18W

Garmin Radar compatible No

WHAT IS IN THE BOX?

With Transducer

  • ECHOMAP UHD 93sv with LakeVü g3 for U.S.
  • GT56UHD-TM transducer
  • Power/data cable
  • Tilt mount with quick release cradle
  • Flush mount
  • Protective cover
  • Hardware
  • Documentation
$1,199.99
Sold Out

Junk Drawer Cover

Designed to fit the stock JunkDrawer included with the Bonafide SS127 the new JunkDrawer Cover heightens the utility of the already useful JunkDrawer. Most kayaks and fishing kayaks lack quick access storage within easy reach for grab and go items and the JunkDrawer was a unique solution to that problem. Now, with the addition of the mesh cover you have a highly secure storage compartment with added zippered pockets for even better organization. The cover easily attaches and detaches from your JunkDrawer using the built in notches on each corner of the JunkDrawer and the bungee on the cover. Made in the USA.
$29.99

SS Series Rudder Kit Featuring the YakAttack SwingBlade

The rudder kit for the SS Series of Bonafide Kayaks (SS107 and SS127) features the new YakAttack SwingBlade Rudder and includes every component and part needed for adding a rudder to your Bonafide Kayak.

Designed to be quiet and ergonomic, this rudder kit adds even more fishability to your SS107 or SS127. It utilizes the stock Double Acting™ Foot Braces featured on the Bonafide SS Series and offers hands-free steering capabilities, as well as to help with tracking. The SteeringReel provides added on-the-fly adjustability for going from the low to high seat position. Designed to be ergonomic, the retractable lift/lower handles install on either side of the seat, allowing you to quickly deploy or stow your rudder. The super wide blade provides added surface area to make the rudder incredibly responsive, while the vents above the waterline reduce wind drag.

Each of the components are 100% custom designed and made to maximize the performance of your SS07 or SS127.

Features:
Increases paddling efficiency and performance.
Adjustable tension at the foot braces "on the fly".
Low drag pulley for smooth deployment.
Rubber bumpers to reduce noise during deployment.
Tight turning radius for maximum performance.
Rudder lock with hook tether to aid in transport.
Includes all necessary components.
Made in the USA.
$169.99
Sold Out

SS Steering Kit

This steering kit utilizes the stock Double Acting™ Foot Braces featured on the Bonafide SS Series and offers hands free steering capabilities. When going from the low position to the high position, it's easy to adjust your foot braces with the SteeringReels. Included are two sections of Sprectra cord, tubing, and a left/right SteeringReel assembly. This kit is commonly used on the SS Series Bonafide's in conjunction with DIY motor installs or third party rudder kits. Each of the components are 100% custom designed and made to maximize the performance of your Bonafide.
$59.99

SS127 Bow Bucket

Storage bucket for the SS127 bow hatch
$59.99

Follow us on social media!