Thanks for registering your SS107!
Now that you have registered your kayak, let us help you create the best experience on the water
Accessories
Access Plate Accessory Package
Bonafide Dry Pod Accessory Package
The second common use of the Dry Pod is to mount your fish finder display to the top surface, store your battery on the inside, and mount your transducer on the underside. Hinged on the bow side of the compartment, the Dry Pod can easily be lifted forward by releasing the rubber strap allowing the ability to remove any debris from your fish finder’s transducer. Included in this kit is one complete Dry Pod with side clips and a lid. Made in the USA.
Bonafide Fin Dome Tag Accessory Package
Bonafide Flex Wings, SS Kit
Bonafide Hinge-Dry Pod Accessory Package
Bonafide Karbonate Board
KBF Approved
High color yellow that’s easy to read and extremely durable.
Built in Cradle
Bonafide Kayak Covers
Bonafide Kayak Covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set - 5 or 6) that can be used to secure the cover when traveling through the sewn in loops on the cover. All covers are made in USA and created with marine-grade anti-wick thread that includes double-stitched construction and 4-ply join seams.
Bonafide Ketch X Board
Tether holes CNC machined on fence end of the board.
High color contrast that’s easy to read and extremely durable.
Tournament numbers on top of Kradle edge
Ketch Kradle incorporated into board (all one piece)
Widened fence
Bonafide Side Clip-Dry Pod Accessory Package
Bonafide Strap-Dry Pod Accessory Package
Bungee Lock Deck Loop Accessory Package
Deck Hook Accessory Package
Deck Loop Accessory Package
Dual Action Foot Brace Set with Grey / Black Traction Pads
Footbrace Rails Accessory Package
Garmin ECHOMAP UHD 73sv, US w/GT56
Take fishing to the next level.
SONAR SUPPORT
This chartplotter supports a variety of Garmin transducers (sold separately), including the Panoptix LiveScope™ scanning sonar system, which lets you see all around your boat in real time.
VIVID COLOR PALETTES
High-contrast vivid scanning sonar color palettes make it easier than ever to distinguish targets and structure.
OPTIONAL TRANSDUCER BUNDLE
Select the transducer bundle to add a GT56 transducer for Garmin CHIRP traditional sonar and Ultra High-Definition ClearVü and SideVü scanning sonars. With three scanning sonar frequencies and 20% greater range for our UHD SideVü sonar, you’ll get top performance at all depths.
PRELOADED MAPPING
Experience unparalleled coverage and detail with preloaded LakeVü g3 inland maps featuring integrated Navionics® data. Maps cover more than 18,000 lakes with up to 1’ contours.
QUICKDRAW CONTOURS
Create personalized fishing maps on-screen with 1’ contours. Keep the data to yourself, or share it with the Quickdraw Community on the Garmin Connect™ app3.
Boat connected.
NETWORK CAPABLE
If you have multiple compatible ECHOMAP UHD or ECHOMAP Ultra devices on your boat, the 7” and 9” models can share information — such as sonar, user data and charts — with them.
NMEA 2000® AND NMEA 0183 NETWORKS
Connect to your compatible autopilots, digital switching, weather, Fusion-Link™ audio system, media, VHF, AIS, engine data, heading sensors — such as the SteadyCast™ sensor — and more from one screen.
ACTIVECAPTAIN® APP
Built-in Wi-Fi® connectivity pairs with the free all-in-one mobile app for access to the OneChart™ feature, smart notifications, software updates, Garmin Quickdraw™ Community data and more1.
FORCE™ TROLLING MOTOR COMPATIBILITY
Take control of the most powerful and efficient trolling motor available2, route it to waypoints, follow tracks and more from the screen of your chartplotter.
ENGINE CONNECTIVITY
Connect this chartplotter to different kinds of engines — including select Mercury and Yamaha® models — to see RPMs, fuel flow, temperature, trim and other important information at a glance. You may need additional hardware, so be sure to check with your engine manufacturer.
SPECIFICATIONS
Physical & Performance
Display size | 6.1" x 3.4"; 7.0" diagonal (15.5 x 8.6 cm; 17.8 cm diagonal) |
Display resolution | 400 x 800 pixels |
Physical dimensions | 9.8" x 5.5" x 2.0" (25 x 13.9 x 5.1 cm) |
Receiver |
5 Hz |
Water rating |
IPX7 |
Weight |
1.7 lbs.(0.77kg) |
Mounting options | Bail or flush |
Display type | WVGA display |
Antenna | Internal or external over NMEA 2000 |
Maps & Navigation
Preloaded maps |
LakeVü g3 (inland maps) |
Accepts data cards |
1 microSD™ card; 32 GB maximum size |
Routes | 100 |
Track log | 50,000 points; 50 saved tracks |
Features
ClearVü |
Yes with CHIRP (built-in) |
Waypoints |
5,000 |
Transmit power | 500 W (RMS) / 4,000 W (peak to peak) |
NMEA 0183 compatible | Yes |
Dual-beam (77/200 kHz) sonar capable | Yes |
Supports DSC (displays position data from DSC-capable VHF radio) | Yes |
NMEA 2000® compatible | Yes |
ActiveCaptain compatible | Yes |
Sonar recording | Yes |
Garmin Marine Network™ ports |
1 Panoptix™ port |
Garmin Sonar compatible | Yes |
GSD™ Black Box sonar support | No |
Sonar history rewind | Yes |
Garmin SmartMode compatible (customizable monitor presets) | No |
Dual-frequency (50/200 kHz) sonar capable | Yes |
Maximum depth |
2,300 ft @ 77 kHz, freshwater 1,100 ft @ 77 kHz, saltwater (depth capacity is dependent on water bottom type and other water conditions) |
SiriusXM™ Weather & Radio compatible | No |
Wireless connectivity |
Yes |
Water temperature log and graph | Yes |
GCV™ Black Box sonar support | Yes |
Wireless mouse compatible | No |
NMEA 0183 input ports |
1 |
J1939 Compatible | No |
Supports AIS (tracks target ships position) | Yes |
Polarized support | No |
Garmin Meteor™ Audio System compatible | No |
Wireless remote compatible | No |
Supports FUSION-Link™ compatible radios | No |
Transducer pin numbers | 12 |
Bottom lock (shows return from the bottom up) | Yes |
NMEA 0183 output ports |
1 |
Tide tables | Yes |
Power consumption |
15W |
Garmin Radar compatible | No |
- ECHOMAP UHD 73sv with LakeVü g3 for U.S.
- GT56UHD-TM transducer
- Power/data cable
- Tilt/swivel mount with quick release cradle
- Flush mount
- Protective cover
- Hardware
- Documentation
Garmin ECHOMAP UHD2 73cv, With GT20-TM Transducer
WHY TALK TO A LOCAL WHEN YOU CAN FISH LIKE ONE?
They say locals know best. But anyone who says that hasn’t fished with the ECHOMAP UHD2 5”and 7” chartplotters with clear, crisp sonar and mapping.
The bright 5” or 7” keyed display is made for convenience.
Get double the views1 with Garmin CHIRP traditional and ClearVü scanning sonars.
What’s under the water looks even better with high-contrast vivid color palettes.
Wi-Fi® connectivity2 between compatible chartplotters makes it easy to share info.
Enjoy No. 1 in mapping3 with our LakeVü g3 and BlueChart® maps with Navionics® data.
Hi Rise Seat Accessory Package
Junk DRAWER Accessory Package
Besides hull design, the main aspect that makes a fishing kayak a fishing kayak is storage and organization for rods, tackle, and assorted gear. The Junk Drawer solves those issues in a simple sliding tray located underneath our HiRise™ Seat and is featured stock on the SS127 sit-on-top fishing kayak. The Junk Drawer can be add to the SS107 utilizing the stock YakAttack GTSL90 GearTrac located underneath the seat. This allows the Junk Drawer to be slid in and out from underneath the seat to help you find the right bag of bait or other quick access tackle and gear. To aid in rod management the Junk Drawer features four grooves to keep your rods in place and within an arm’s reach. With easy to access gear and rod management the Junk Drawer is just one feature that creates ultimate fishability. Included in this kit is one thermoformed Junk Drawer, Mighty Bolt, and ¼”-20 knob. Made in the USA.
COMPATIBLE ON THE SS107 and SS127.
Ketch ID
Slides on your Ketch board for easy maneuvering
Adjustable to fight against sunlight
Comes with ID Card holder
Note: Before applying dual loc to clear ID Holder, clean surface for better adhesion
Ketch Keeper
Fits all Ketch Boards
Standard Kit comes with 10-32 3/8” bolts 10-32 t-nuts for t-track X2 each per package.
Krate Kit comes with 10-32 x 1” Nylon lock nuts Washers X4 of each per package.
Stainless Steel Hardware
NRS Chinook Fishing PFD
With all the organization and attachment points needed for your fishing accessories, the NRS Chinook Fishing PFD is the world's best-selling life jacket for kayak anglers. Not only is it designed to make you more effective on the water, the comfort of the Chinook simply can't be beat.
- The Chinook is a Type III, medium profile life jacket delivering 16.0 pounds of flotation.
- PlushFit™ foam and a high-back design combine to create an extremely comfortable vest for any type of raft or kayak seat.
- A mesh lower-back offers added ventilation on warm days.
- Two large, zippered pockets, sized for tackle boxes, with internal organization, plus two smaller accessory pockets with hook-and-loop closure.
- A fifth, tool holder pocket offers quick access to pliers, line cutters or other fishing gadgets and accessories.
- Also features a rod holder, strobe attachment point, reflective accents and knife lash tab.
- The zippered front entry and six adjustment points offer a customized fit.
- The Chinook carries the US Coast Guard Certification through Underwriters Laboratories (UL).
SIZING
SPECIFICATIONS
Weight: | 2 lbs |
---|---|
Category: |
|
US Coast Guard Type: | III |
Profile: | Medium |
Design Flotation: | 16.0 lbs. |
Outer Fabric: | 400-denier ripstop nylon |
Entry System: | Front zip |
Pockets: |
|
Lash Tabs: |
|
Adjustment System: |
|
Features: |
|
Omni Hook Accessory Package
Power-Pole Micro Anchor w/ 8 Ft UL Spike
Power-Pole Micro Spike Driver can hold Jon boats and small skiffs up to 1,500 lbs (including passengers) and is perfect for kayaks and paddle boards. Micro anchor unit is easily-removable making storage or transfer to other vessels simple. Includes quick-release bracket. Other mounting options available including custom mounting brackets or transom mount adapters. Includes 15 ft power cord for 12v battery or if no on-board battery is available, add the Micro Battery Pak & Charger (sold separately) and go wherever adventure takes you. Micro driver unit accommodates any 3/4" spike, including the Power-Pole Ultra-lite 8' Spike.
- Features:
- Lightweight, compact design
- Virtually silent operation
- streamlined user interface
- Includes:
- Adjustable Quick-release Bracket
- 2-button Key Fob Remote
- Advanced Dash Switch
- 15' Power Cord
- 8' Ultra-lite Spike
Seat Rack Accessory Package
Seat Retention Kit, Use on all Bonafide Seats
SS Fat Grip Bow Handle Accessory Package
For the SS107 and SS127 we knew we needed to design a handle that was not only comfortable in your hand while carrying your kayak to and from the water, but also we wanted it to be the closest thing to your body while being carried. With the handle being the closest point of contact to you it makes it much easier to carry while keeping your back in an upright natural position. The diameter of the handle is wider than most kayak handles yet more narrow than molded in handles making it the perfect size to maximize grip strength and comfort.
Attached on the underside of the Fat Grip Handle is a highly comfortable rubber insert that won’t cause any pressure points, add grips, and evenly distributes the load of your fully rigged or unloaded fishing kayak in an easy to grip carry handle. Included in this kit is the assembled Fat Grip Bow Handle and stainless steel hardware. Made in the USA.
SS Fat Grip Stern Handle Accessory Package
Attached on the underside of the Fat Grip Handle is a highly comfortable rubber insert that won’t cause any pressure points, add grips, and evenly distributes the load of your fully rigged or unloaded fishing kayak in an easy to grip carry handle. Included in this kit is the assembled Fat Grip Stern Handle and stainless steel hardware. Made in the USA.
SS Series Rudder Kit Featuring the YakAttack SwingBlade
Designed to be quiet and ergonomic, this rudder kit adds even more fishability to your SS107 or SS127. It utilizes the stock Double Acting™ Foot Braces featured on the Bonafide SS Series and offers hands-free steering capabilities, as well as to help with tracking. The SteeringReel provides added on-the-fly adjustability for going from the low to high seat position. Designed to be ergonomic, the retractable lift/lower handles install on either side of the seat, allowing you to quickly deploy or stow your rudder. The super wide blade provides added surface area to make the rudder incredibly responsive, while the vents above the waterline reduce wind drag.
Each of the components are 100% custom designed and made to maximize the performance of your SS07 or SS127.
Features:
Increases paddling efficiency and performance.
Adjustable tension at the foot braces "on the fly".
Low drag pulley for smooth deployment.
Rubber bumpers to reduce noise during deployment.
Tight turning radius for maximum performance.
Rudder lock with hook tether to aid in transport.
Includes all necessary components.
Made in the USA.
SS Side Handle Accessory Package
SS Steering Kit
SS107 Boss Strap Accessory Package
SS107 Deck Traction Pads-Grey Accessory Package
For those of you who aren’t feeling the orange trim on your Cool Hand Blue SS107, this kit allows you to tone it down and add a color neutral touch to personalize your kayak. Included with this package is a full deck traction kit for your SS107.
Universal Scupper Plugs S/M
Sold in a 2 pack
Size - small / medium
Fits scupper holes ranging from 1.13” to 1.40” diameter
YakAttack AR Tube Rod Holder with Track Mounted LockNLoad Mounting System
The YakAttack Advanced Rod Tube™ is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust. GearTrac not included
There are 3 modes: locked, adjustment, and removal.
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
YakAttack Cam Straps 12 Feet 2 Pack
The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping.
- Sold in a 2 pack
- 12 ft. long
- 1 inch wide webbing
- Made with high-quality polyester webbing
- Custom rubber buckle cover
- Buckle and webbing are made in China
- Buckle cover and sewing are done in the USA
- SKU: YEP-1006-12
YakAttack CellBlok
Interior Space - 6.375'' x 4.25'' x 2.60''
Exterior Dimensions - 10.25'' x 6.75'' x 3.50''
CellBlok box only with hardware to attach to GearTrac.
YakAttack Complete LockNLoad Track Base
YakAttack’s LockNLoad™ mounting system, is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad™ track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt™, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: LNL-1001
YakAttack DoubleHeader Track Mount
In typical YakAttack fashion, they started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The end result of the DoubleHeader Track Mount was a unique addition to the YakAttack product line that allows the ability to attach various accessories using a single attachment point. If you already own two RotoGrip Paddle Holders, then simply remove the rubber washer included with your paddle holders, insert the MightyBolt through the underside of the DoubleHeader, and tighten the body of the RotoGrip. The DoubleHeader in that configuration provides the perfect offset paddle holder solution moving your paddle off the side of your kayak, freeing up track space. Let’s say you want to add dual Omega Rod Holders for crappie fishing. The mounting holes at the end of the DoubleHeader are LockNLoad compatible and allow for easy attachment of LockNLoad accessories like the Omega or Omega Pro. Looking to maximize the number of rods on your kayak for tournament day? The DoubleHeader Track Mount serves as the perfect mounting system for dual AR Tube Rod Holders.
If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob and MightyBolt from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory-installed kayak track.
Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.
The DoubleHeader Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.
- Made in the USA
- Built for Life Guarantee
- Single point of attachment
- LockNLoad Compatible
- Includes two sizes of Track Disks
- DoubleHeader is 8.25” wide
- The DoubleHeader Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
YakAttack GT Cleat XL
The larger and heavier-duty version to our original GT Cleat, the GT Cleat XL™ is our simple and highly effective answer to the issue of line management. It attaches to all YakAttack® GearTrac™, MightyMount XL tracks, and most other kayak track systems. The GT Cleat XL makes for a perfect companion to our highly popular LeverLoc™ Anchor Trolley and is a low profile, easy to attach and adjust anchor line cleat. The underside of the cleat features two tabs and a rubber washer helping keep the cleat from rotating and sliding in the track from anchor line tension. Best used with 1/2" rope.
- Compatible with YakAttack GearTrac, MightyMount, and most other factory-installed kayak track systems
- Best used with 1/2" rope
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: MTA-1004
YakAttack HD Mount LockNLoad
YakAttack’s LockNLoad™ mounting system is exactly what you would expect from the leader in track mounting technology. Now, enjoy the versatility and ingenuity of the LockNLoad System in heavy duty applications such as trolling for big game. Due to the two MightyBolt attachment points, the HD Track Mount gives you more gear security than ever before! No track? No problem! You can easily remove the two MightyBolts and use hardware to quickly deck mount your YakAttack rod holder or fish finder, as well as using holes from old-school deck mounts to mount the HD Track Mount crossways. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.
- Two MightyBolt attachment points gives you better gear security
- Not for use with under 8" of track
- For Heavy Duty applications
- Can be used for deck mounting
- Utilizes pre-drilled holes from old-school deck mounts to be mounted crossways
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: LNL-1006
YakAttack Horizontal Tie Downs
This track mounted tie-down allows a quick and easy attachment point for webbing, small ropes, and bungee in configurations in which the Vertical Tie Down is not ideal. Perfect for securing Blackpaks™, other crate systems, and large gear bags in a kayak tankwell. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.
- Sold in 2 pack
- Attaches to YakAttack® GearTrac™, MightyMounts, and most other factory installed kayak track
- Use with 1"-1.5" webbing straps or bungee
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: AAP-1027
YakAttack Leverage Landing Net, 20 Inch x 21 Inch Hoop with Foam Extension
- Revolutionary Forearm Grip
- Folds for Easy Storage
- Full Rubber Net
- Extended Foam Covered Handle
- Wider, more traditionally designed hoop
- 20" X 21" Hoop
- 54" overall length
Leverage Landing Net is a registered trademark of YakAttack, LLC
- Netting is molded in Taiwan
- All other components are made and assembled in the USA
- Covered by our Built for Life Guarantee
YakAttack LeverLoc Anchor Trolley HD
The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach.
- Easy installation
- New YakAttack Stealth Pulleys
- 35' of highly reflective USA-made 550 paracord
- Includes all necessary hardware for installation
- Heavy duty
- Includes backing plates and extra Padhooks not included in AMS-1003.
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: AMS-1004
YakAttack Lowrance Hook2 Fish Finder Mount with Track Mounted LockNLoad Mounting
Designed to replace the factory base on Lowrance Hook2 4 and 5, Reveal 5, and Simrad Cruise 5. This Lowrance Fishfinder Mount is a simple, clean, and a highly effective solution. This mount improves on the original included mount enabling fast and easy one-handed display adjustment. Includes the LockNLoad Mounting System for maximum versatility and rigidity. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
- GearTrac not included
- Fishfinder not included
- Made in the USA
- Covered by our Built for Life Guarantee
- Patent Pending
- SKU: FFP-1006
YakAttack MightyMount II with FullBack plate
Mighty Mount II is 2"x2.375"x.5"
Contains all necessary hardware
YakAttack MightyMount XL 12"
Designed as a robust but economical mount for longer footprint areas, the MightyMount XL can be installed with screws and nuts, self-threading screws, or even tri-fold rivets! Compatible with all YakAttack track mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the MightyMount XL one of the best looking accessory mounts on the market.
- 1.75" wide x 12" long
- .38” tall
- Includes #10 stainless steel self-threading screws
- Made in the USA
- Made from premium materials designed for use in harsh marine environments
- Usable track length - 10.5"
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: MMXL-12
YakAttack MultiMount Cup Holder
YAKATTACK MULTIMOUNT CUP HOLDER
The YakAttack MultiMount Cup Holder quickly and easily attaches to YakAttack GearTrac, MightyMount, Native Watercraft gear track, Bonafide Kayaks Gear Track and most other kayak track systems.
Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene Bottles to 12 oz cans and water bottles.
The MultiMount Cup Holder also makes a great place to put small tools and other items. Made from premium materials for a lifetime of use in even the harshest environments.
Keep your beverage at reach while kayak fishing with the MultiMount Cup Holder!
KEY FEATURES
- Fits various different size beverage containers
- Large enough to store a can with a koozie
- GearTrac and MightyMount ready without any additional components
- Bottle not included
YakAttack Omega Rod Holder with Track Mounted LockNLoad Mounting System
There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
YakAttack PanFish Portrait Pro Camera Mount
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
The ultra-durable construction of the PanFish Portrait Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.
Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid construction
Features the new YakAttack Camera Ball
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
11.5" Tall
YakAttack PanFish Pro Camera Mount
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
The ultra-durable aluminum construction of the PanFish Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.In addition, the patented design allows for one-hand rotation without loosening or tightening the product, giving you the ability to get the smoothest pan shot.
Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid aluminum construction
Features the new YakAttack Camera Ball
It floats!
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
33" Tall
YakAttack ParkNPole 7'8"
- Foot for paddling
- Tip for staking into the ground
- 7' 8" long
- .845'' Diameter Tubing
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: PNP78
YakAttack ParkNPole Link 8'
The ParkNPole Link™ is a smarter, two-piece version of the popular 8' ParkNPole™. The two-piece construction makes transportation easy to and from the water or makes it possible to store inside the hull of your fishing kayak. For a longer option purchase the 46'' extension making the total length 12'. At 12 feet, the ParkNPole Link™ plus the extension, make for a great push pole and also helps when anchoring in deeper water. Made from specially formed fiberglass and UV stabilized, wear resistant nylon. At 1.8 lbs, it is incredibly lightweight and extremely durable.
- 8' long
- .845'' Diameter Tubing
- Purchase the 46" extension for an extended length of 12'
- Wear-resistant nylon tip and foot with a fiberglass body
- Weights only 1.8 lbs, yet is extremely durable.
- The two-piece construction allows for easy transportation and storage.
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: PNPL-8
YakAttack Rotogrip SnapNStrap 2 Pack
The SnapNStrap Security Tether was specifically designed for the YakAttack RotoGrip Paddle Holder; RotoGrip not included. It acts as a simple hook and loop system using bungee to add extra security and peace of mind knowing your paddle is safe and secure. To attach the SnapNStrap system, simply remove the rubber washer and MightyBolt from your RotoGrip and slide on the molded frame with the two tabs facing upwards. Apply a little pressure, and the system will snap in place. From there, reassemble the washer and MightyBolt. To secure your paddle, wrap the bungee and pull tab over the shaft of your paddle and loop it over the tab of the SnapNStrap frame.
- RotoGrip not included
- Tool-less attachment
- Compatible with the RotoGrip Paddle Holder
- Sold as a 2 pack
- Made in the USA
- Lifetime Warranty
YakAttack Round Base Fish Finder Mount with Track Mounted LockNLoad Mounting System
YakAttack SideArm Track Mount
Included with the SideArm Track Mount are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system was included with your kayak, try both of them and determine which one will provide the best fit. Only one Track Disk is needed on the underside of the SideArm for the mount to work as designed. In addition, the Track Disks allow for the SideArm to be mounted in any direction in relation to the track or MightyMount it is attached to. For example, you can set up the SideArm directly off the side of your kayak for a paddle holder solution or having it facing inwards and virtually 360º anywhere in between.
Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.
The SideArm Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.
- Made in the USA
- Built for Life Guarantee
- Single point of attachment
- LockNLoad Compatible
- Includes two sizes of Track Disks
- The SideArm Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
- SKU: TMA-1003
YakAttack SideWinder Anchor Line Reel, Includes Track Hardware and 75 Feet of 550 Paracord
Includes hardware for install onto your kayak's track system
Includes 75 feet of 550 paracord
14"x6.38"x0.75"
Geartrac not included
YakAttack Surface Mount Retractor
- Made from UV Resistant High Density Polyethylene
- 36" Kevlar Cord
- Removable 4" tether
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: RET-1001
YakAttack Torqeedo Throttle Mount
YAKATTACK TORQEEDO THROTTLE MOUNT WITH TRACK MOUNTED LOCKNLOAD MOUNTING SYSTEM (TQM-1001)
Featuring the LockNLoad mounting system this throttle mount is a great solution for attaching your Torqeedo throttle to YakAttack GearTrac, MightyMount II, MightyMount XL or most other factory-installed kayak track. The LockNLoad base gives you peace of mind offering an ultra secure install, but is also very easy to adjust on the water and attach or remove. Includes all necessary hardware. Patent pending. Torqeedo throttle not included. Compatible with YakAttack MightyMounts, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.
The LockNLoad track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the accessory is completely secure while making adjustments. Let go of the lever and you are back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
- GearTrac and Torqueedo throttle not included
- Made in the USA
- Patent Pending
- SKU: TQM-1001
YakAttack Track Mounted Retractor
- UV Resistant High Density Polyethylene
- 36" Kevlar Cord
- Removable 4" tether
YakAttack Track Nut Kit, 6pk
- Pack of 6 track nuts
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: TN-1420-6
YakAttack Universal Mounting Plate
Mounting plate is 6" x 3.5"
YakAttack VISICarbon Pro, MightyMount and GearTrac ready
Enhances your visibility day or night.
SilentSlip foam fits most flush mount and tubular rod holders.
48" long deployed, 14" collapsed.
Collapsed unit stores inside flag.
It floats!
Designed with carbon fiber tubing for stiffness and ultra light weight.
Silent Snap flag attachment system provides quick and easy flag installation and removal.
LEDs burn 100 hours on 3 AA batteries (included).
10,000+ hours lamp life.
YakAttack Zooka II Rod Holder with Track Mounted LockNLoad Mounting System
There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.